Luccon Manual
Our material has multiple purposes and can be used in various facets of design. We have summarised the most important facts and characteristics as follows ...
Measurements & surface
Processing
Area of application
Measurements and surfaces
- Thickness 1,8 / 2,8 / 3,8 cm
- Solid construction elements max. L/B/H 212 / 90 / 70 cm
Surfaces
The optimal light translucence is achieved by perpendicular fiber optic cables.
The fiber optic cables should be polished on the slab surface.
- Sanded
- Matt polished
- Sandblasted and brushed
Processing
The processing of Luccon translucent concrete can be done either manually or by machine on natural or concrete stone.
Surface processing- Sawing
- Charring
- Dry grind work
- Wet grind work
- Sandblasting and brushing
- Polishing
- Concave and convex processing
Drillings
- General market sizes. Wet or dry drills
Edge processing
- Upper – or/and under side slightly broken and torn
- Upper – or/and under side polished
- Upper – or/and under side fully rounded
Grinding/Polishing
- Manually or by machine. Concavely or convexly processed and polished
Specialised work
- Groovings, sawed
- Notches, polished
- Miter joint, polished
- Corners of miter joints cut and bonded with Luccon glue
Area of application
Inner and outer bricks bonded with Luccon glue according to requirements
- gemäß statischen Anforderungen
- mit Luccon-Kleber geklebt
Inner and outer façade slabs
- With an anchor bolt
- With an undercut anchor
- Screwed on frontally to the substructure,
each slab revisable - Screwed onto substructure with terminal strip,
each slab revisable - Sliding element inserted into the substructure,
each slab revisable
Wash basins and working surfaces
according to architectural plans available from Luccon
Design varieties- Architectural décor stone
- Display cases
- Cabinets
- Advertising structures
- Display window structures
- etc.
Solid construction elements
as solid construction element according to requirements
Luccon on Facebook